|No Paypal, Debit or Credit card? No problem.. Simply send Bank Check or Money order to : GRADY HOWELL at 6732 W. COAL MINE AVE, SUITE 237, LITTLETON, CO 80123, We will not accept personal checks.
Be sure to provide ship to Name and address, phone number and list of parts purchased.If you have any questions or needs. Call DAX at 303-459-2780 and ask for Duane. We have been in Business for 20 years !!
and Remember.... ThatsDax.com !!! Call 303-459-2780 and ask for Duane . Or Skype "levellone"
For Tech Support and more, go to this Great Forum >>
Please allow 5 Business days before Engines or Kits can be shipped.
All pictures and information on this site is copyright protected.
|F80 PREMIUM SUPER DUTY ENGINE KIT 69CC ONLY $224.99 and
$19.00 shipping . Shipping Lead Time is 5 Business days. 90 day
Warranty. Comes with everything you need except the bicycle !!
|F50 KIT $199.99
|F80 KIT $224.99
|We build then test to
order, so Please Allow 10
Business days Lead time
169.99 and 19.00 shipping with
90 day warranty
|In Loving Memory of our Father
Grady Frank Howell Jr,
|These Engines are built here in USA from only the best Globally sourced parts. These
new Gen VII Engineered parts include 40mm 360 Degree Steel Full circle GP type
Crank hand drilled and balanced Con Rod with Center Oiling holes, Hardened 8.8
case bolts and cylinder studs, RB 6202Z Bearings, HR 6202 Clutch bearing, 8.8
hardened steel clutch pin and bearing, NT Carb, 725g 415H hardened drive chain, and
more. Type S Rod and more. Comes complete with everything except the bicycle.
Mechanical Aptitude required ! Allow 5 Business days for shipping since Engine is
made to order, tested, and then shipped. Thank you..
|KTMC 9HP 2 Stroke Engine and Carburetor
only. Not a Kit ! This is a KTM Clone Motor
Cycle Engine !! NOT A KIT!! Makes 9hp at
12,000 rpm. Very Reliable ! For best
performance get the Factory Expansion
Chamber. This Engine is Built , oiled,
tested and then shipped. single speed and
automatic. Uses RT Carb Cable.
Mix 32:1 ratio. Racers and go fast riders
love this motor. Only $499.99. and $22.00
Shipping This is a Clone 50cc MotorCycle
Engine. NOT A KIT !!!
Gear and Clutch oil Use Maxima MTL 75
stack height = 0.57 – 0.61 inches
|KTMC 49CC 9HP 2
STROKE ENGINE AIR
COOLED.. WOW !!!
|KTMC Factory Expansion Chamber with muffler
and mounting springs. Get the most out of your
KTMC engine with this factory tuned pipe
expansion chamber. Only $99.99
are made to Order
Engine is built,
tested, oil drained
and then shipped
|DAX F80 STAGE 1
LITTLE EVIL Engine and kit!
40mm Stroker S Rod , RT Head, RT Carb with
Jet kit and RT Cable, Skirted Piston, Cleaned
Exchange ports, Full Circle Steel Crank Hand
Drilled and Balanced, 36T Steel Racing
Sprocket, Grade 8.8 upper USA Bolts, 415
Super Duty Chain, Ball Bearing Idler, High Flow
Chrome Exhaust, 2 Liter Tank, CDI Ignition,
Chain guard and more.. It is a complete Kit !
This DAX Stage 1 Engine delivers the goods !!!
Awesome Fire Power for your BUCK!! Only
$299.99 and $19.00 shipping. Built in USA.
.Please allow 2-3 days to build, test and then
|DAX F80 STAGE 1 LITTLE EVIL !! !
|DAX F80 STAGE 1 LITTLE EVIL !
|DAX F80 STAGE 1 LITTLE EVIL
Engine, RT Carb and 36T!
DAX 40mm Stroker S Rod Engine with RT Head, RT
Carb with Jet kit and RT Cable, Skirted Piston,
Cleaned Exchange ports, Full Circle Steel Crank
Hand Drilled and Balanced, 36T Steel Racing
Sprocket, Grade 8.8 upper USA Bolts. Ready to
Only $219.99 and $19.00 shipping.
|Built in USA Made to order, this is our most
Powerful 50cc 4 stroke ever. Making 3.25hp and
2.95nm of Torque. The DAX Titan XC50R is
Awesome !! Comes with 76mm/3in 2 shoe Clutch !
Only $279.99 and $19.00 shipping. Please allow 10
business days to receive this motor. Thank you.
|VR1 BELT DRIVE TRANSMISSION
Here we have the DAX VR1 Belt
Drive Transmission for enignes
using 3 inch 76mm clutch for all
2 shoe and 3 shoe clutch
versions. This Copyright Deisgn
and Patent pending Parts is the
first and only one of its kind.
Smooth, Simple , affordable and
very very reliable. With a near
perfect 4.25:1 reduction for
great acceleration, climb and
top speed, and fee wheeling
output sprocket so you can
coast the hills and not over
speed your motor !! In a word..
Only $129.99 !!
|4 STROKE LOVERS REJOICE !!!
VR1 BELT DRIVE IS HERE !!!
|COPYRIGHT PROTECTED DESIGN
PATENT PENDING !!
|FRICTION DRIVE DAX UNIVERSAL T6
ALLOY MAIN BRACKET ! This Main
Bracket is made in USA from the Finest T6 alloy.
Strong and light !! Beautiful ! Also comes with 3in Dia
Bell and fixed 1.5 inch roller, Stand offs, Spacers,
nuts and bolts. No Motor, No Throttle. Only $169.99
and 12 dollars for shipping.
|Jack Shaft Shifting Kit with 5
Point Free Wheel fits F50, F60,
and F80 2 Stroke engines.
$139.99 AND $12.00 SHIPPING.
|Jack Shaft Shifter Kit Super Duty !
|Main Bracket is Engineered
and Made in USA from the
finest T6 Alloy !
|DAX MAGNUM 50cc 4 Stroke Engine and VR1 Belt Drive
Transmission. Buy as a Package and save BIG !!... This DAX
MAGNUM 4 Stroke Built in USA with the Smooth Belt Drive Auto
Adjusting VR1 Transmission is also Built in the USA !! MAGNUM
4 Stroke is a power house of an Industrial Commercial IC Engine
with Steel Cylinder, 3 Ring Piston and Balanced Crank, Stronger
Case Bolts, Stronger Shroud, 2 Shoe Clutch 3 IN 76mm Dia. and
more.. VR1 is a Belt Drive Using Gates Made in USA AX25 belt
for superior life and super smooth operation. Reduction is a near
perfect 4.25:1 and out put sprocket is an 11T free Wheeling
sprocket so you can coast the biggest of hills and never over
speed your motor.
Get the Magnum, VR1 Belt Drive with Belt Guard and only $22.00
for Shipping .Only 299.99 !! While supplies last !!
50cc 4 Stroke
Engine and VR1
|FRONT OR REAR MOUNT FRICTION DRIVE
PROTECTED BY COPYRIGHTS
VAu 1-046-335 VAu 1-060-523
Patent Pending Made in USA!