|No Paypal, Debit or Credit card? No problem.. Simply send Bank Check or Money order to : GRADY HOWELL at 6732 W. COAL MINE AVE, SUITE 237, LITTLETON, CO 80123, We will not accept personal checks.
Be sure to provide ship to Name and address, phone number and list of parts purchased.If you have any questions or needs. Call DAX at 303-459-2780 and ask for Duane. We have been in Business for 20 years !!
and Remember.... ThatsDax.com !!! Call 303-459-2780 and ask for Duane . Or Skype "levellone"
For Tech Support and more, go to this Great Forum >>>
Please allow 5 Business days before Engines or Kits can be shipped. All pictures and information on this site is copyright protected.
|DAX FRICTION DRIVE KIT ! 1 Hour Install. Works Wet or dry.
1 year Warranty.
Kit Includes the Following:
Made in USA Universal Radius Design Main Bracket 11.25
inches long dual drilled Copyright Protected
1 3inch/78mm clutch bell
2 Huge 6302 16x42x13mm main sealed bearings
1 super duty extra large main axle hardened 16mm OD
1 Diamond cut Steel 1.25 inch Free Wheel Drive roller
1 Hardened Diamond Cut 1 inch drive roller
1 9 inch U bracket
1 5 inch U bracket
1 quick release with spacers
1 pivot bolt with spacers
1 set of rubber paint protectors
1 set of engine mounting studs and spacers and washers
2 support straps 15.5 inches long extra long slots
|New Radius Designed Main Bracket with pictures and Video
coming. Lead time will be approximately 5 Business days.
Only $149.99 and $19.00 Shipping
|FRONT OR REAR MOUNT FRICTION DRIVE
PROTECTED BY COPYRIGHTS
VAu 1-046-335 VAu 1-060-523
Patent Pending Made in USA!
Only $149.99 while Supplies Last !
|F80 PREMIUM SUPER DUTY ENGINE KIT 69CC ONLY $224.99 and
$19.00 shipping . Shipping Lead Time is 5 Business days. 90 day
Warranty. Comes with everything you need except the bicycle !!
|New Radius Designed Main Bracket.
Lead time will be approximately 5 Business days.
Only $129.99 each and $19.00 Shipping when you buy a 2
PACK !! Save Big with this 2 PACK Deal !!
|2 PACK !!
in part or
|F50 KIT $199.99
|F80 KIT $224.99
|SUPER TITAN XC50S. A 48.8cc 4 stroke
Engine For those that need extra
power, we have the Super Titan. Making
3hp and 2.75 nm of torque !! Please
Allow 10 Business days before this
engine can ship. Thank you.
|Please Allow 10
Lead time for this
Super Titan Engine.
169.99 and 19.00 shipping with
90 day warranty
|In Loving Memory of our Father
Grady Frank Howell Jr,
|Jack Shaft Shifting Kit with 5 Point
Free Wheel fits F50, F60, and F80 2
Stroke engines. $139.99 and free
|These Engines are built here in USA from only the best Globally sourced parts. These
new Gen IV Engineered parts include 40mm 360 Degree Steel Full circle GP type
Crank hand drilled and balanced Con Rod with Center Oiling holes, Hardened 8.8
case bolts and cylinder studs, RB 6202Z Japan Crank Bearings, HR 6202 Clutch
bearing, 8.8 hardened steel clutch pin and bearing, NT Carb, 725g 415H hardened
drive chain, and more. Comes complete with everything except the bicycle.
Mechanical Aptitude required ! Allow 5 Business days for shipping since Engine is
made to order, tested, and then shipped. Thank you..
|KTMC 9HP 2 Stroke Engine and Carburetor only. Not a Kit ! Makes 9hp at
12,000 rpm. Wow !! For best performance get the Factory Expansion
Chamber. This engine is made, oiled , gassed, and tested, then crank
case oil drained and then Engine is shipped to Customer. Takes about 2
weeks to get it because of the testing needed prior to shipping. Uses a
Wet clutch and gear box is single speed and automatic. Uses RT Carb
Cable. Mix 32:1 ratio. Racers and go fast riders love this motor.
Only $499.99. Must call to order. 303-459-2780 and ask for Duane.
|KTMC 49CC 9HP 2
STROKE ENGINE AIR
COOLED.. WOW !!!
|KTMC Factory Expansion Chamber with muffler and mounting springs.
Get the most out of your KTMC engine with this factory tuned pipe
expansion chamber. Only $99.99
|Click here for MINI 50
PDF 38 pages
Allow some time for
pages to load
depending on your
total before it